Source: Green Car Congress | March 14, 2018
ARPA-E is awarding $16 million in funding for eight projects as part of the Innovative Natural-gas Technologies for Efficiency Gain in Reliable and Affordable Thermochemical Electricity-generation (INTEGRATE) program.
INTEGRATE projects will develop advanced natural-gas-fueled, distributed electric generation systems with conversion efficiencies of more than 70%: double the delivered efficiency of average utility-scale, fossil-fueled plants. The INTEGRATE program seeks to achieve this unprecedented efficiency level at an attractive cost by developing fuel cell and engine hybrid system concepts and enabling technologies.
These systems could ultimately be used by both commercial and industrial end users—including hospitals, hotels, office buildings, factories, and others.
Funded projects are:
Colorado School of Mines; High Efficiency, Low Cost & Robust Hybrid SOFC/IC Engine Power Generator – $3,006,864. The Colorado School of Mines (Mines) team will develop a hybrid power generation system using a solid oxide fuel cell stack combined with an internal combustion engine. The team’s project seeks to characterize and validate pressurized fuel cell stacks, design the hybrid system, and develop high-efficiency demonstration hardware. The system will use the hot air and exhaust gases it produces to keep components running at the proper temperatures to maximize efficiency. With this design, the team hopes to achieve robust operation with high efficiency and low capital costs.
Oak Ridge National Laboratory; Development of Next-Generation Heat Exchangers for Hybrid Power Generation – $1,000,000. The Oak Ridge National Laboratory (ORNL) team will design and develop a high efficiency, high temperature, ceramic/steel alloy heat exchanger. The novel and low cost heat exchanger will be designed by optimizing the heat transfer surface with advanced modeling and will be fabricated using advanced 3D printing technology. If successful, this innovation would enable high performance, compact heat exchangers with unconventional and complex geometries that cannot be manufactured using conventional techniques.
Stony Brook University; Hybrid Electrochemistry-Advanced Combustion for High-Efficiency Distributed Power (HE-ACED) – $2,325,000. The Stony Brook University team will develop a hybrid power system using a pressurized solid oxide fuel cell coupled to a novel, split-cylinder, internal combustion engine design. The combustion engine will use some cylinders as an air compressor, which will feed the pressurized fuel cell. The other cylinders will be fed with the “tail gas” unused by the fuel cell in the first stage, which will be ignited by high compression and burned in a lean, low temperature combustion process to produce additional power for the system.
Saint-Gobain Ceramics and Plastics, Inc.; Super High-efficiency Integrated Fuel-cell and Turbo-machinery (SHIFT) – $2,801,430. The Saint-Gobain Ceramics and Plastics team will develop a hybrid power system by pressurizing a durable all-ceramic solid oxide fuel cell stack with a specialized screw compressor/expander to boost efficiency. This sophisticated combustion engine will pressurize the fuel cell and improve its efficiency while burning the remaining “tail gas” left over from the cell as its fuel. The fuel cell stack will build on lessons learned during Saint-Gobain’s work with NASA to create more robust fuel cells assemblies. The combustion engine technology will be based off work performed in an earlier ARPA-E project.
FuelCell Energy, Inc.; Adaptive SOFC for Ultra High Efficiency Power Systems – $3,099,613. The FuelCell Energy team will develop a low-cost architecture for a pressurized solid oxide fuel cell stack for integration into a variety of hybrid energy systems with unsurpassed efficiencies greater than 70%. The team will take a modular approach, building 5kW stacks that can be grouped together in a pressurized container. These modules can be added or removed as needed to suit the scale of the hybrid system, enabling a range of power applications.
Nexceris, LLC; Advanced Solid Oxide Fuel Cell Stack for Hybrid Power Systems – $2,150,356. The Nexceris team will develop a pressurized solid oxide fuel cell stack for use in hybrid power applications. The team’s design improves control over the reaction of natural gas in the cell, increasing performance and durability. A novel anode current collector component provides structural support and helps define the flow of fuel gas through the stack. The 10-kW-scale cell stack building block will be housed within a hermetically sealed “hotbox” to reduce drastic changes in temperature and pressure during operation. These design features would allow for seamless integration with a turbine or combustion engine to maximize the overall efficiency of a hybrid system.
Washington State University; De-Coupled Solid Oxide Fuel Cell Gas Turbine Hybrid (dFC-GT) – $678,014. The Washington State University (WSU) team will demonstrate the technical feasibility of a hybrid power system using a pressurized fuel cell stack and gas turbine. The team’s innovation centers around the integration of a membrane to concentrate oxygen from air before feeding it into the fuel cell, improving performance and boosting efficiency. The system “de-couples” the pressurized fuel cell and turbine components, allowing it increased operating flexibility.
University of Wisconsin-Madison; Integrated High Pressure SOFC and Premixed Compression Ignition Engine System – $1,012,000. The University of Wisconsin-Madison (UW-Madison) team will develop a hybrid system using a solid oxide fuel cell stack and a plug-and-play, turbocharged internal combustion that uses premixed compression ignition (PCI) to boost efficiency. Gases that leave the fuel cell, which consumes about 75% of the fuel, are pumped into the engine to be ignited by compression of the pistons. To help combust these “tail gases,” the engine adds an extra burst of spark-ignited natural gas, improving engine efficiency. The UW-Madison team is targeting larger industrial applications, aiming for a 1MW system.